Warning Codes - Haier HWD1000 Manual Del Usuario

English
Warning Code
Warning Item of
code concern
Water supply
E11
Drainage
E12 Drainage
E13 Water supply
E31 Motor
EA3 Water level is
abnormal in
the drying
process
EC4 The tempera-
ture of air vent
EC5 The dry
temperature
sensor
U01 Door is locked
U02 Door is not
locked
U03 Spin lopsidely
U04 The door is
opened
E22 The memory
function has
failed
19
Content of
identification
The water level can not
reach the reset water level
within 5 minutes
The water level can not
reach the setting water level
within 8 mintues
The water level can not
reach the reset level in 8
minutes after drainage
starting
The water is above the
warning level
The feedback signal does
not change in 8 minutes
during the motor runs
The water setting level
during the drying process
Within 30 minutes of dry
cycle there is 5 minutes in
which the temperature is not
increasing
The drying sensor circuit
short or open
Can not unlock
Can not lock the door
The judgement of
un-balance is above 1000g
The door is opened
EEPROM is not functioning
Action to take Checking position
and ask for help
Warning and stop Check if the water
running pressure or water
supply is low
Warning and stop Check if the water
running pressure is low or
stops supplying
Warning and stop Check the water
running outlet of the drainage,
adjust it and restart
the machine
Ask the technician to
Warning and stop
repair it
running
Warning and stop Ask the technician to
running repair it
Warning and stop Check the water
running outlet of the drainage
required and adjust it
if required and restart
the machine
Warning and stop Ask the technician to
running repair it
Warning and stop Ask the technician to
running repair it
Warning and stop Ask the technician to
running repair it
Warning and stop Ask the technician to
running repair it
Spin at low speed Ask the technician to
and cancel drying repair it
Warning Close the door
Warning Ask the technician to
repair it