Type 441, (Illustration depends on the model)
Fig. 1
Fitting the hose to the pump
Remove and discard the plug from the threaded connector of the
pump. Screw the hose with the union nut to the threaded connector
of the pump.
Outside of work, the spraying wand (h) is attached to the spraying
wand holder (j).
Always remove the spraying wand from the open side of the spraying
wand holder (vertical to the device), never on the side!
7 Work preparation
a. Spray tank
b. Tank lid screwed to the filling
socket (c)
d. Carry handle
e. Standing foot
f. On/off switch
g. Hand valve
h. Spray wand
i. Nozzle attachment
j. Spray tube holder
k. Carrying belt
l. Rechargeable battery
ENGLISH 4