Publicidad
Idiomas disponibles
Idiomas disponibles
22
THE NAME OF EACH PART
Canopy
Armrest
Crotch strap
Foot rest
EN
Front wheel
fold joint
Front wheel
Canopy joint
Quick
Release-button
Front wheel
supporter
Handle Bar
Close hook
Safety lock
Close-fixation
Brake regulator
Rear wheel
Lock
Folding
button
Cup holder
Attached bag
Button backrest
Thing basket
Brake board
ASSEMBLY
1
Opening: as shown in the picture,hold on the handlebar together,then open it in
whole hog, when you hear "click" to pull the second lock,the frame will be opened.
2
Front wheel installation
(according to the design): as
picture A, insert the front wheel
fold joint into the front slot,if
you hear "click", the front wheel
is in right place. As picture B, If
you want to remove it, just hold
down the sheet iron and pull out
the wheel.
3
Installation of the rear wheel:
As shown in the picture, place
the wheel seals (A) on the axle
behind and in front of the wheel
(B). Then insert the pin (C) into
the axle hole and fix it firmly,
finally install the wheel cover (D).
4
As shown in the picture, put the
rear wheel fold joint into the rear
slot. Hear "click" means the rear
wheel is installed to well. (If you
want remove it, just hold down
the sheet iron and pull out the
wheel).
B
C
B
A
D
23
EN
Publicidad
