Publicidad
Idiomas disponibles
Idiomas disponibles
26
11
Folding: when folding the buggy, press the two lock buttons located by the
handle for parents (FIG A).Then fold the buggy following the arrows (FIG B).
A
12
Installing car seat:
first just press the
button and pull out
EN
the armrest (FIG A).
Position the car seat
above the adapters,
connecting their sides
until you hear a "click".
Try to lift the car seat
to confirm that it is
properly installed (FIG
B).
PART LIST
Canopy
Socket Joint
B
B
A
Boot cover
1 3
Carry cot installation: First pull the iron wire support to both ends to the fixed
position, as FIG. A, then, insert the adaptors each side of carry cot handle.
hear the "click" sound after the adaptors in place, as FIG. B, finally as FIG. C
after all software cloth cover.
A
1 4
Use of the brake: The buggy is
equipped with a footbrake located
on the rear axle. Press the lower
part of the brake down; the brake
is activated when you hear the
locking sound (FIG.1). The brake
is unlocked by pressing the upper
part of the brake.
1 5
The foot rest regulation: is
shown as diagram A~B, the
hands are on the side to knead
tightly, the index finger is from
the reverse side after pressing
a card, agreeable arrowhead
direction pics the bottom to
adjust feet to step and when
the child goes to bed, even
up feet to step directly and
upward then.
B
C
A
B
27
EN
Publicidad
