JENN-AIR JXT8836ADS Guía Usuario página 4

CONTROLS & FEATURES
CONTROLS: FILTER CHANGE INDICATOR(CARBON FILTERS)
Filter Change Reminder (Carbon, if fitted):
When your hood is installed as a 'Purifying' (Ductless Recirculating) unit, it is fitted with a set of
CarbonFilters to purify exhaust and fumes from cooking, then re-circulate the air within the home.
TheseCarbon Filters are required to be replaced after every 120 hours of use. The Filter Change
Reminder function in the microprocessor needs to be switched on. The micropr0_ssor in the
controls when set, will elapse and count usage time and indicate by a flashing _ when carbon
filter replacement is needed.
Settingthe FilterChange Reminder:
WhenOff,hold (_) forapprox.5 seconds.
Thedisplaywill changefrom
(exhaust m ode)to (_, (purifying mode/
carbonfiltersused)this indicatesthat the
elapsetimer functionis switchedon and
CarbonFiltersareused.
Filter Replace Indicator:
I
When the display _ starts flashing, the
Carbon Filters requirer eplacement.
Re-setting Function:
Once filters are replaced, with hood off,
press and hold (_, the display will appear;
hold for approximately 5 seconds until
on display disappears _ .The Filter
Change Reminder is now re-set and a new
120 hours elapse cycle is initiated.
hold 5 secs. display from <--> to <C>
@
@@
disp_> flashes
hold 5 sees. display from <C> to < >