JENN-AIR JXT8836ADS Guía Usuario página 5

CONTROLS & FEATURES
CONTROLS: F ILTERCLEANINDICATOR (METALFILTERS)
Filter Clean Reminder (Standard Metal Filters fitted)
Whether your hood is installed as an Exhaust or Purifying unit, a set of metal filters are
fitted by the factory. These Metal Filters are intended to filter out residue from cooking.
They need not be replaced on a regular basis but are required to be kept clean. The Fi_r Change
Reminder function in the microprocessor will automatically indicate by a flashing _R,_
when the metal filters need to be cleaned after every 30 hrs. of use.
Filters can be cleaned by hand with non-abrasive soap or in a dishwasher. Heavily soiled
filters should also be soaked in grease cutting detergent such as Formula '409' or its equivalent,
prior to cleaning.
FilterCleanReminder:
m
When_- flasheson display, t he metal
filtersinstall--"A"ed are requiredto be cleaned.
Thiswill occurafter every30 hoursof use.
display <A> flashes
(
®
Re-setting Function:
Resetthe FilterCleanReminder t imerwhen
filtersarecleanedand re-installed. P ress
andhold _) for approx.5 seconds, t he
display will appear;hold for approximately
5 secondsuntil _ on displaydisappears
(_ .TheFilterCleanReminder f unction
is nowre-setand a new30 hourselapse
cycleis initiated.
hold 5 sees. display from <C> to < >