JENN-AIR JXT8836ADS Guía Usuario página 6

MAINTENANCE
CLEANING
Surface Maintenance:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive
detergent (e.g. Comet powder scrub, EZ-Offoven cleaner), or steel wool/scouring pads which will
scratch and damage surface.
For heavier soil use liquid degreaser such as "Formula 409" or "Fantastic" brand cleaner.
After cleaning, you may use non-abrasive stainless steel polish/cleaners such as 3M or ZEP, t o
polish and buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and
with the grain. Do not use any product containing chlorine bleach. Donot use "orange" cleaners.
Metal Filters
TheMetalFiltersfitted by thefactoryare
intendedto filter out residueand grease
from cooking. T heyneednotbe replacedon a
regularbasisbut are required to be keptclean.
Filtersshouldbe cleaned after every30
hoursof use. Usethe FilterClean
Reminder f unctionon the controlsto
determine whenfiltersrequirecleaning.
Remove and clean by hand or in
dishwasher. Spray 'Formula 409' or
equivalent degreasing detergent and leave
to soak if heavily soiled.
Dry filters and re-install before using hood.
Replacing Metal Filters
Shouldfilterswearoutdue to age and
prolonged use,replacewith followingpart
number:
HoodModel: Part No. Filters in pkg.
JXT8836ADS XXXXXXXX 3
Alsoreplaceanydamaged filter that has
punctured or brokenmesh,bentor brokenframe.