Publicidad
Idiomas disponibles
Idiomas disponibles
• Already split wood and wood chips can be danger-
ous. You can stumble, slip or fall down. Keep the
working area tidy.
• While the machine is switched on, never put your
hands on moving parts of the machine.
• Only split logs with a maximum length of 55 cm.
Warning! This electric tool generates an electromag-
netic field during operation. This field can impair ac-
tive or passive medical implants under certain condi-
tions. In order to prevent the risk of serious or dead-
ly injuries, we recommend that persons with medical
implants consult with their physician and the manufac-
turer of the medical implant prior to operating the elec-
tric tool.
Remaining hazards
The machine has been built using modern technol-
RJ \ LQ DFFRUGDQ F H ZLWK UHFRJ Q L ] H G VDIHW\ UXOHV
6RPHUHPDLQ L Q J KD] D UGVKRZHYHUPD\ VWLOOH[ L VW
• The splitting tool can cause injuries to fingers and
hands if the wood is incorrectly guided or support-
ed.
• Thrown pieces can lead to injury if the work piece is
not correctly placed or held.
• Injury through electric current if incorrect electric
connection leads are used.
• Even when all safety measures are taken, some re-
maining hazards which are not yet evident may still
be present.
• Remaining hazards can be minimized by following
the safety instructions as well as the instructions in
the chapter Authorized use and in the entire oper-
ating manual.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Release the handle button and switch off the ma-
chine prior to any operations.
• Avoid accidental starts of the machine: Do not press
the start button while inserting the plug into the
socket.
• Use the tools recommended in this manual to obtain
the best results from your machine.
• Always keep hands away from the work area when
the machine is running.
24 | GB
7.
Technical data
Motor
Input P1
Output P2
Operating mode
Motor speed
Dimensions D/W/H
Table height
Working height
Wood length min. - max.
Wood diameter min. - max.
Power max.
Piston stroke
Forward speed
Return speed
Oil quantity
Weight
Subject to technical changes!
* Operating mode S6 40% is an uninterrupted, period-
ic mode. The mode comprises of a start-up period, a
time with constant load and an idle time. The operating
time is 10 mins, the relative duty cycle is 40% of the
operating time.
Noise
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection.
Noise data
Sound power level L
Sound pressure level L
Uncertainty K
www.scheppach.com
230 V∼ / 50 Hz
845 x 935 x 1500 mm
100 - 550 mm
WA
pA
WA/pA
3000 W
2200 W
*S6 40%
2800 rpm
800 mm
940 mm
80 - 300 mm
8 t*
550 mm
3.1 cm/s
17.3 cm/s
4 l
109.9 kg
93.6 dB
77.8 dB
3 dB
Publicidad
