Publicidad
Idiomas disponibles
Idiomas disponibles
Battery Type
The following tools operate on an 18-volt battery pack:
DCMPS520.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB184, DCB184B, DCB187, DCB189, DCB546, DCB547,
DCB548, DCBP034, DCBP034G. Refer to Technical Data for
more information.
Package Contents
The DCMPS520 package contains:
1 Pruning Saw
1 Guide Bar
1 20 cm Saw Chain
1 Guide Bar Cover
1 Wrench
1 Li-Ion battery pack (C1, D1, E1, G1, H1, L1, M1, P1, Q1, S1, T1,
U1, X1, Y1, Z1 models)
2 Li-Ion battery packs (C2, D2, E2, G2, H2, L2, M2, P2, Q2, S2, T2,
U2, X2, Y2, Z2 models)
3 Li-Ion battery packs (C3, D3, E3, G3, H3, L3, M3, P3, Q3, S3, T3,
U3, X3, Y3, Z3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with B models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D
WALT under license. Other trademarks and
e
trade names are those of their respective owners.
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
Wear eye, ear and head protection.
Wear gloves.
Wear proper foot protection.
Do not expose the tool to rain or high humidity or leave
outdoors while it is raining.
Contact of the guide bar tip with any object should
be avoided.
Rotational direction of the saw chain.
Always use two hands when operating
the pruning saw.
Switch the tool off. Before performing any maintenance
on the tool, remove the battery from the tool.
99
Directive 2000/14/EC guaranteed sound power.
Date Code Position (Fig. A)
The production date code
24
by a 2-digit week and is extended by a 2-digit factory code.
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Trigger switch
1
Lock-off lever
2
Front hand guard
3
Guide bar
4
Saw chain
5
Bar tip guard
6
Chain assembly cover
7
Bar lock nut
8
Chain tensioning screw
9
Oil level indicator
10
Oil cap
11
Guide bar cover
12
Wrench
13
Rear handle
14
Front handle
15
Battery pack
16
Battery pack release button
17
Intended Use
The DCMPS520 pruner saw is designed for cutting limbs or logs
up to 15 cm in diameter. The pruner saw is not intended to be
operated in a tree, on a ladder, from any unstable support and
should always be operated with two hands.
DO nOT use under wet conditions, during heavy winds/storms,
or in presence of flammable liquids or gases.
DO nOT use in dark or foggy conditions. This tool is to be used
with sufficient light.
These pruners are professional power tools.
DO nOT let children come into contact with the tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills.
Children should never be left alone with this product.
EnGLIsH
consists of a 4-digit year followed
45
Publicidad
