B) Freezer compartment
Defrosting is very straightforward
and without mess, thanks to a special
defrost collection basin.
Defrost twice a year or when a
frost layer of around 7 (1/4") mm
has formed. To start the defrosting
procedure, switch off the appliance
at the socket outlet and pull out the
mains plug.
All food should be wrapped in several
layers of newspaper and stored in a
cool place (e.g. fridge or larder).
Containers of warm water may be
placed carefully in the freezer to
speed up the defrosting.
Do not use pointed or sharp-edged
objects, such as knives or forks to
remove the frost.
Never use hairdryers, electrical
heaters or other such electrical
appliances for defrosting.
Sponge out the defrost water
collected in the bottom of the freezer
compartment. After defrosting, dry
the interior thoroughly.
Insert the plug into the wall socket
and switch on the electricity supply.
6.3.Placing the food
Egg tray
Fridge
compartment
shelves
Fridge
compartment
door shelves
Crisper
20
Egg
Food in pans,
covered plates
and closed
containers
Small and
packaged food or
drinks (such as
milk, fruit juice
and beer)
Vegetables and
fruits
6.4.Changing the
illumination lamp
To change the Bulb/LED used for
illumination of your refrigerator, call
your AuthorisedService.
The lamp(s) used in this appliance
is not suitable for household room
illumination. The intended purpose
of this lamp is to assist the user to
place foodstuffs in the refrigerator/
freezer in a safe and comfortable way.
The lamps used in this appliance
have to withstand extreme physical
conditions such as temperatures
below -20 °C.
(only chest and upright freezer)
6.5.The dairy (cold storage) bin
Provides lower temperature within
the refrigerator compartment.
Use this bin to store delicatessen
(salami, sausages, dairy products
and etc. ) that requires lower storage
temperature or meat, chicken or fish
products for immediate consumption.
Do not store fruits and vegetables
inside this bin.
Depending on the tallness of bottles
that are put to the bottle shelf, bottles
can be in the position to touch the
door rack. In this case, you can
change the position of bottle shelf so
that it does not touch the door rack.