Publicidad
Idiomas disponibles
Idiomas disponibles
Installation,
continued
■ Connecting Procedures
Turn off your computer
Connect the signal, power and audio connectors as shown below
Turn the monitor on, then turn on the computer
A. IBM PS / 2 or PC / AT compatible models
© Connect the supplied signal cable to the monitor's port
(2) Connect the supplied AC power cord to the CEE-22 connector
(3) Connect the supplied audio cord to the AUDIO IN connector and hook it
@ Position the AC power cord, signal cable A and audio cord A in clamper A
(D
Position the signal cable B and the audio cord B in clamper B
(D
Attach the cable covers refernng to page 9
(7) Connect the other end of the supplied signal cable to the computer's corresponding 15 pin mini D-
Sub video connector
B. Apple computers
© Use a UNIMAC-82D MAC adapter
Panasonic MAC adapter
— Caution---—
• To prevent the cable from coming loose, the cable connectors must be securely fastened with screws
• Do not unplug the USB hub power cord When plugging it in, align the plug correctly, using the
arrow mark near the socket for reference, before plugging it in_
Publicidad
