Publicidad
Idiomas disponibles
Idiomas disponibles
Installation,
continued
■ Attach the Cable Covers
© Align the top part of the back cable cover with the monitor and press the part of the cover shown
in the diagram to fit the cover into position
Make sure that both right and left tabs on the lower section of the back cable cover are securely
locked in the holes of the monitor
© Carefully raise the face of the monitor to its normal vertical positioning and press the cable
through the channel on the side of the stand
© Attach the left and the right cable cover by positioning it so that the arrow mark is up and pointing
to the side of the monitor
©
©
— Caution ---—-— -—-
• Do not damage the cable when attempting to plug it in
• When attaching the cable covers, be sure that cable has not become caught between the
cover and the monitor
■ Use Headphones
Prepare the headphones {commercially available) and connect as shown in the illustration below
— Caution---—-—---
• The shape of the terminal of your computer may differ from that shown here In case, read the
instruction manual for your computer and connect as indicated
• Lower the volume if howling occurs
• Volume will vary depending on the headphones being used, so set the volume as appropriate
• If noise occurs in the speakers or headphones, move the cables away from the monitor
Publicidad
