Publicidad
MT-4314
Choose one of four User settings by turning the knob
Press
to set the cooking time; the minute indicator starts flashing; enter the target value by turning knob
and press
again. When the hours indicator starts flashing, set the target value by turning the knob
and press
. When the cooking temperature
indicator starts flashing, enter the target value by turning the knob
then press and hold the button
for 2 seconds to start the program with your personal
customized settings. New settings will be stored in the memory for future use. The user may adjust these customized settings at any time. After the end of the User program,
the Keep warm function automatically starts but can be deactivated at any time.
FOOD TYPE SUBMENUS
The autoprograms can work with one of four types of food groups: MEAT
, CHICKEN
, FISH
and VEGETABLES
.
The Programs which can work with specific food group submenus are: FRY/DEEP FRY
, SLOW STEW
, SOUP/BROTH
, STEW
and
STEAM/BOIL
When chosing any of these programs, you can combine the food group setting by pressing and turning the knob
until the desired food group
icon flashes. To select and start the program, press and hold the button
for 2 seconds.
MULTILEVEL USER PROGRAM «SMART»
Following the four User settings is the SMART program – a multilevel User program. This program contains up to nine phases with customized settings in one cooking
process. Choose SMART by turning the knob
. Digits from 1 to 9
begin flashing by the SMART icon
. Press the button
,
starts flashing by the
symbol. It means you entered into edit mode of the first phase. Press
; the minutes indicator will begin flashing on the display.
37
Publicidad
