Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Display image is incorrect
The screen color is
mono or abnormal.
The screen blinks.
Do you see an "Unrecognized monitor, Plug&Play (VESA
DDC) monitor found" message?
Have you installed
the display driver?
NOTE
• Check if the signal cable is properly
connected and use a screwdriver to fasten
if necessary.
• Make sure the video card is properly
inserted in the slot.
• Set the color setting higher than 24 bits
(true color) at Control Panel - Settings.
• Check if the screen is set to interlace mode
and if yes, change it to the recommend
resolution.
• Make sure to check if the video card
supports Plug&Play function.
E65
Publicidad
