Qlima ECO 1700 Instrucciones De Uso página 109

man_ECO1700('20) V7.indd 109 man_ECO1700('20) V7.indd 109
SWITCHING OFF SAVE MODE
1. Switch the stove off and repeat the above actions until "OFF" appears in the
display.
2. Then push button 3.
3. Save mode is now switched off.
To prevent excessive start-ups and shut-downs and extra wear on various parts, it
is recommended not to set the differential temperature at less than 2ºC or higher
than 4ºC.
4.7 STANDARD SHUT-DOWN
The stove can be switched off by pressing button 3 until "OFF" appears in the dis-
play. During the shutdown phase, the supply of wood pellets to the combustion
chamber is stopped and the room air circulation blower is switched off. The smoke
extraction blower will continue to run for a short time, switching off after the
cooling-down phase.
4.8 SETTING THE USER MENU AND THE TIMER FUNCTION
You can use the control panel to set the current time, current day and the timer
function, by selecting the appropriate menu. See Table 1 below for the appropri-
ate menu. The timer function allows the stove to switch on and off automatically
at two different times.
Menu Description
MN01 Current day
MN02 Current hours
MN03 Current minutes
MN04 Technical parameter
MN05 Timer time on program 1
MN06 Timer time off program 1
MN07 Use timer program 1 Yes or No
MN08 Timer time on program 2
MN09
Timer time off program 2
MN10
Use timer program 2 Yes or No
Table 1: Overview of the different menus.
To activate the desired menu, press key 1 and then press key 3 several times until
the desired menu appears on the display. The display moves to the next menu each
time key 3 is pressed. If no key is pressed for a period of around 20 seconds, the
display will return automatically to the normal operating mode.
SETTING THE CURRENT DAY, HOURS AND MINUTES
a. Setting the current day.
1. Press key 1 and then key 3 several times until MN01 appears on the display,
alternating with 'off' or a corresponding day number. See Table 2.
2. Press key 1 or 2 to set the correct current day. For an overview of the day num-
bers see Table 2.
3. Press key 3 to save the data and proceed to menu MN02.
For use by
user
user
user
technician
user
user
user
user
user
user
4
109
30-07-20 16:47 30-07-20 16:47