Progress Lighting P250110 Manual De Instalación página 7

Hanging the Fan
REMEMBER to turn off the power. Follow the
steps below to hang your fan properly:
Step 1. Remove the decorative canopy bottom cover
from the canopy by turning the cover counter
clockwise.(Fig. 5)
Step 2. Remove the mounting bracket from the
canopy by removing the 1 of 2 screws from the
bottom of the mounting bracket and loosening the
other one a half turn from the screw head. Next,
turn the canopy counter clockwise to removing the
mounting bracket from the canopy. (Fig. 5)
Step 3. Pass the 120-volt supply wires through the
center hole in the ceiling hanger bracket as shown
in Fig. 6.
Step 4. Secure the hanger bracket to the ceiling
outlet box with the screws and washers provided
with your outlet box. (Fig. 6)
Canopy
cover
Figure 5
Ceiling hanger
Ceiling
bracket
hanger
bracket
Ceiling
canopy
Figure 6
UL Listed
electrical
box
Washers
Mounting screws
120V Wires
(supplied with
electrical box)
4.