Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Wireless Remote Controller (Cooling Only Model)
JET
COOL
• Reset (display): When you press the reset button, all the functions shown on the screen of remote
controller (above image), will be visible on the display. But some of these functions are optional for
your product and may not actually function.
10
Room Air Conditioner
Control
Display screen
Control panel
* Some functions may not be supported, depending on the
model.
Display
panel
screen
Fan button : Air come out from the
indoor unit below to the room without
air temperature change.
Sleep mode auto button*: Sets the
sleep mode auto operation.
Temperature adjustment buttons:
Adjusts the room temperature when
cooling and heating.
On/Off button: Turns the power
-
on/off.
Indoor fan speed button: Adjusts the
fan speed.
Operation mode selection button*:
Selects the operation mode.
Cooling operation ( ) /
Auto operation (
Dehumidifying operation ( )
Jet cooling*: cools down the indoor
temperature within a short period of
JET
time.
COOL
Air flow direction button: Adjusts the
air flow direction vertically.
Temperature display button: Displays
the room temperature. Press
5 sec, conversion °C / °F
Timer button: Sets the current time
and the start / end time.
Navigation and functions button*:
Adjusts the time and sets the special
functions.
: Auto clean /
saving cooling
Set/clear button: Sets or cancels
-
functions.
Reset button : Resets the remote
-
control settings.
LIGHT button: Adjusts the brightness
of the indoor unit display.
Description
) /
for
: Operates energy
Publicidad
