Publicidad
Idiomas disponibles
Idiomas disponibles
Energy-Saving Cooling Mode
Energy-saving cooling mode can save energy in cooling operation, because it can operate efficiently by
setting body-adaptation time according to the change of time and temperature and adjusting desired
temperature automatically.
Display Luminosity
The unit display Luminosity can be adjusted by using the remote controller.
Press the LED LUMINOSITY button.
Display LED will be dark. Press the button again to set bright display.
Setting the Current T ime
1
Press the SET CLEAR BOTTON For 3 seconds.
2
Press the TIMER SETTING BUTTONS until the desired time is set.
3
Press the SET/CLEAR button.
NOTE
Check the indicator for a.m. and p.m.
1. Press the ON/OFF BUTTON to start the unit.
2. Select cooling operation.
3. Press the ENERGY-SAVING COOLING MODE BUTTON.
4. To cancel the energy-saving cooling mode, press the ENERGY-SAVING
COOLING MODE BUTTON again and unit will operate in previous
mode(Cooling mode), but temperature remains 22°C.
Operating Instructions
Owner's Manual 15
Publicidad
