SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME
V
Volts
A
Amperes
Hz
Hertz
W
Watt
min
Minutes
Alternating Current
Direct Current
n o
No Load Speed
Class II Construction
/min
Per Minute
Wet Conditions Alert
Read The Operator's Manual
Safety Alert
Eye Protection
Keep Hands and Feet Away
No Reach
No Slope
Keep Bystanders Away
Ricochet
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOLS
SIGNAL
DANGER
WARNING
CAUTION
CAUTION
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Precautions that involve your safety.
Always wear eye protection with side shields marked to comply with ANSI
Z87.1 when operating this equipment.
Keep hands and feet away from blade and cutting area.
Do not reach hands or feet under mower deck.
Do not operate on inclines greater than 15º. Mow across the face of slopes,
never up and down.
Keep all bystanders at least 100 ft. away.
Pay attention that bystanders are not injured through foreign objects
thrown from the mower.
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property damage.
SAVE THESE INSTRUCTIONS
6