AL-KO 112853 Instrucciones De Uso página 23

EU declaration of conformity
Malfunction
Materials to be shredded
are not properly cut.
Motor switches off.
Unusual noises.
Rattling on the machine.
If you encounter any malfunctions that are not listed in this table or which you cannot rectify
yourself, please contact our responsible customer service.
EU DECLARATION OF CONFORMITY
We hereby declare that this product in the version introduced into trade by us, complies with the requirements of the harmonised EU Di-
rectives, EU safety standards and the product-specific standards.
Product
Drum shredder
Type
Easy Crush LH 2800
Serial number
G2052058
Sound power level
EN ISO 3744
measured / guaranteed
87 / 90 dB(A)
Named position
Société Nationale de Certification et
d'Homologation
2a Kalchesbruck
L-1852 Luxembourg
440558_b
Possible cause
Counterplate in the cutting unit not
correctly adjusted.
Motor protection switch switched
off due to cutting drum overload or
blockage.
Screws on the motor, its mount or
the carriage are loose.
Manufacturer
AL-KO Geräte GmbH
Ichenhauser Str. 14
D-89359 Kötz
EU Directives
2006/42/EC
2000/14/EC
2004/108/EC
2006/95/EC
Conformity evaluation
2000/14/EC
Appendix V
Solution
Readjust counterplate, see "Read-
justing the counterplate".
The motor can be switched on
again after a cool-down phase of
approx. 5 minutes.
Re-tighten screws.
Duly authorised person
Andreas Hedrich
Ichenhauser Str. 14
D-89359 Kötz
Harmonised standards
DIN EN 55014-1
DIN EN 55014-2
DIN EN 13683
DIN EN 62233
DIN EN 60335-1
DIN EN 61000-3-2
DIN EN 61000-3-11
Fpr EN 50434
Wolfgang Hergeth
Managing Director
Kötz, 08.10.2014
21