Greencut GE212X Guía De Mantenimiento página 59

ASSEMBLY
STEP BY STEP
Place the transport box on
a solid surface and carefully
remove the lid. Use two
people to remove all the
parts from the box and
inspect the components
to make sure there are no
missing parts before you
start assembling the wood
chipper.
59
Connect two tyres. Wheels:
Push the axle through the
rim, tighten the nut and
secure with a splint. Then
fit the hubcap. Axle: Tilt
the chassis blades back
slightly and secure the axle
with bolts, washers and
nuts. Install the base foot.
Supporting foot: Tilt
the chassis blades back
slightly and secure the
base foot with bolts,
washers and nuts.Install
the discharge chute.
EN - GE212X