Descargar Imprimir esta página

EVVO H10 INOX Manual De Instrucciones página 37

Publicidad

ENGLISH
cleaning or maintenance.
- If not in use, unplug the appliance from the mains.
- Use oven gloves when putting utensils into or taking them out of the oven.
- Always grip the oven door handle in the centre, as the ends of the oven door may be
hot due to possible heat leakage.
4. INSTALLATION
Installation
- The appliance must only be installed by qualified personnel following the
instructions supplied and taking into account the current regulations. EVVO declines
all liability in the event of incorrect installation, which may cause injury to people and
animals, as well as damage to property.
- Important: the appliance must be disconnected from the mains before any
adjustment or maintenance work is carried out on it.
- The air duct is used for ventilation.
- In order for the built-in appliance to function properly, the cabinet containing it
must be suitable. Figure 2 shows the dimensions of the cut-out for installation under
the worktop or in a wall unit.
- To ensure adequate ventilation, the rear panel of the cabinet must be removed. It is
preferable to install the oven so that it rests on two wooden slats. If the oven rests on
a flat surface, there must be an opening of at least 45×560 mm.
- Adjacent cabinet panels shall be made of heat-resistant material. In particular,
enclosures with a veneered exterior must be assembled with glues that can withstand
temperatures up to 100 oC.
- In compliance with current safety regulations, it must not be possible to come into
contact with the electrical parts of the oven once it has been installed.
- All parts that ensure the safe operation of the appliance must only be removed with
the aid of a tool (NOT INCLUDED).
- To fix the oven to the cabinet, open the oven door and fix it by inserting the 4 wood
screws into the 4 holes on the perimeter of the frame
Electrical connections
Ovens equipped with a three-pole power cable are designed to operate on alternating
current. The cable for the grounding of the device is yellow green. Mounting the
37
HORNO INTEGRABLE EVVO H10 INOX / BLACK

Publicidad

loading

Productos relacionados para EVVO H10 INOX

Este manual también es adecuado para:

H10 black