Levoit Core 300 Manual De Instrucciones página 13

U S I N G Y O U R A I R P U R I F I E R
1.
Place the air purifier on a flat, stable
surface with the display facing up. Allow
at least 38 cm / 15 inches of clearance on
all sides of the air purifier. Keep away from
anything that would block airflow, such as
curtains. [Figure 2.1]
2. Plug in and tap
purifier. The fan will start on level I.
[Figure 2.2]
3. Optionally, tap
between I, II, and III.
Note:
•
The indicators are not buttons and
cannot be used to change the fan
speed.
•
The fan speed indicators will light up
when active.
•
Fan speed III is the loudest, but cleans
air the quickest.
•
For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at high speed (level III) for
15–20 minutes before using a lower
speed.
•
To effectively clean air, keep windows
and doors closed while the air purifier
is on.
38 cm /
15 in
Figure 2.1
to turn on the air
to change fan speed
38 cm /
15 in
4. Tap
to turn off the air purifier.
Figure 2.2
Memory Function
When the air purifier is plugged in, it will
remember its previous fan speed setting.
Note:
The air purifier will not remember
timers or Sleep Mode.
Sleep Mode
Sleep Mode operates quietly by using the
lowest possible fan speed.
•
Tap to turn Sleep Mode on/off.
• Tapping will exit Sleep Mode.
Note:
•
All indicators will be at half brightness
while Sleep Mode is on.
EN
13