Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
WALL MOUNT INSTALLATION
1. Locate the Key Holes (A) on the back of the product.
2. Find and mark two circles on the wall where the product
will be mounted. The circles need to be 5" apart from
center to center.
NOTE: Is it recommended to mount the EXO5 HD on a
solid surface or wall stud. Do NOT hang the product on
the ceiling. Use drywall anchors if a stud is not available.
3. Drill 2 #10 panhead screws into the wall (screws not
included). Screws should be weight rated for 10 lb
vertical load each.
4. Leave about ¼" of each screw exposed.
5. Place the wide portions of the Key Holes over the heads
of the 2 screws.
6. Slide the product down until the screws are inside the
narrow portion of the key holes and the product is
secured to surface.
Note: Hang product from sturdy location using large screws that will
support product. Be careful not to hang the product in such a way
that it prevents normal fan operation or damages the cord. Keep the
electrical cord safely routed to avoid being tripped over or pulled.
Avoid placing the product where it could be easily bumped.
12 English
CLEANING
A
GRILLE REMOVAL
Screwdriver required.
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grille.
1. Remove the 6 screws located on the front of
the grille.
2. Dust or wash the Front Grille with a mild
dishwashing soap. Do not place grille in the
dishwasher. The excessive heat can distort the
plastic.
3. To reattach - align the 6 screw holes and
replace all the screws.
Use the brush attachment on your household
vacuum cleaner to vacuum any accumulated
dust off the Front Grille and Air Inlets.
Screw
Screw
Screw
Screw
Screw
Screw
13
English
Publicidad
