Resetting The Filter Display; Deactivating The Filter Display - Bosch B36ET Serie Manual De Uso Y Cuidado

Resetting the filter
display
If the filter display is not reset, the
next required filter change cannot
be signalled by the display.
After each filter change:

Simultaneously hold down
the super cool and ice buttons
for 3 seconds.
Deactivating the filter
display
m
WARNING
To avoid serious illness or death, do
not deactivate the filter display while
using an water filter.
The appliance might be used without
a water filter. If you choose this option
replace the water filter by a water filter
substitute cartridge. In this case the filter
display might be deactivated to prevent
filter change messages.
To deactivate the filter display:

Simultaneously hold down
the setup and ice buttons for
3 seconds.
Re-activate the filter display
by pressing the super cool and
ice buttons for 3 seconds
simultaneously.
m
19