Descargar Imprimir esta página

Sony GDM-20E21 Manual De Instrucciones página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Use of the Tilt-Swivel
Specifications
With the tilt-swivel, this unit can be adjusted to be viewed
Picture tube
0.31 mm phosphor trio pitch
at your desired angle within 90° horizontally and 20°
20 inches measured diagonally
vertically,
(19" visual)
To turn the unit vertically and horizontally, hold it at its
90-degree deflection
bottom with both hands as illustrated below.
Video image area
Approx. 389 x 293 mm (w/h)
(15 3/8 x 115/8 inches)
Resolution
Horizontal: Max. 1920 dots
Vertical: Max. 1200 lines
(Recommended Resolution:
Horizontal: 1280 dots
Vertical: 1024 lines)
Standard image area
Approx. 373 x 280 mm (w/h)
(14 3/4 x 11'/s inches)
or
Approx. 350 x 280 mm (w/h)
(13 7/8 x 11 1/8 inches)
Deflection frequency
Horizontal: 30 to 96 kHz
Vertical: 48 to 160 Hz
AC input voltage/current
100 to 120 V, 50/60 Hz, 1.7 A
220 to 240 V,50-60 Hz,1.2A
.
Dimensions
472 x 493.5 x 501 mm (w/h/d)
Damper
Wire
(18 5/8 x 19! /2 x 19 3/4 inches)
Mass
Approx. 30 kg (66 lb 2 oz)
Using a white background, very thin horizontal stripes on
the screen are visible as shown below. These stripes are
damper wires. These wires are attached to the aperture
grille inside the Trinitron tube and are there to damp
vibrations of the aperture grille in order to prevent them
from influencing to the picture quality.
Design and specifications are subject to change without
notice.
Damper wire
Approx. 8 cm
Approx. 8 cm
11

Publicidad

loading

Este manual también es adecuado para:

Gdm-20e21t