Publicidad
Idiomas disponibles
Idiomas disponibles
Functions of Controls
See the given pages for further description.
[1] »~« (reset) button (page 9)
Press to reset the adjustment data to the factory-preset
levels.
[2] (option) button (page 7-8)
Press to set the option OSD (On Screen Display).
[3] © ® (convergence) button (page 7)
Press to adjust the vertical and horizontal convergence.
[4] OO (geometory) button (page 6)
Press to adjust the rotation and pincushion.
[5] O@ (size) button (page 6)
Press to adjust the vertical and horizontal picture size.
[6] ©
(center) button (page 5)
Press to adjust the vertical and horizontal picture
position.
© (brightness) —/+ (¥/#) buttons (page 5-8)
Press to adjust the brightness.
Act as the ~/+ ($/#) buttons to adjust the other items.
0 (contrast) —/+ («/=>) buttons (page 5-8)
Press to adjust the contrast.
Act as the —/+ (4=/=) buttons to adjust the other
items.
[9] & power saving indicator (page 10)
Lights up when the monitor is in the Power Saving
Modes.
© power switch and indicator (page 10)
Press to turn the monitor on or off. The indicator lights
up when the monitor is turned on.
AC IN connector
Plug in an AC power cord.
Video input 2 connector (13W3)
The cable accepts RGB video signals (0.714 Vp-p,
positive).
Sacce
Al: Red
A2: Green
mee
A3: Blue
Al
A2 A3
Note
If you use a computer or video board of high output
level (about 1.0 Vp-p), you may not be able to obtain the
optimum display. In such case, try decreasing the
picture contrast, or use a computer or video board with
a lower output level.
Video input 1 connector (15-pin)
The connector accepts RGB video signals (0.714 Vp-p,
positive), and SYNC signals.
OMOO@®
No. | Signal
Blue Ground
DDC + 5V*
Ground
(Composite
Sync on Green)
a
Sa
[6
0
Bi-Directional
Data (SDA)*
H. Syne
me fe eur r f
+
12
3
Red Ground
14
V. Sync
Green Ground
15
Data Clock(SCL)*
* Display Data Channel (DDC) Standard by VESA
Publicidad
