Anleitung HBHS 26_SPK7:Anleitung BHS 26_D
GB
13. Troubleshooting
Fault
The machine does not start.
Correct starting procedure not
followed.
Sooted or damp spark plug
Incorrect carburetor setting
The machine starts but does not
Incorrect choke lever setting
develop its full output.
Soiled air filter
Incorrect carburetor setting
The engine does not run smoothly
Incorrect electrode gap on the
spark plug
Incorrect carburetor setting
Engine smokes excessively
Incorrect fuel mix
Incorrect carburetor setting
20
08.01.2007
Possible cause
Troubleshooting
Follow the instructions for starting.
Clean the spark plug or replace it
with a new one.
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
Set choke lever to" "
Clean the air filter
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
Clean the spark plug and adjust
the electrode gap or fit a new spark
plug.
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
Use the correct fuel mix (see fuel
mixing table)
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
9:30 Uhr
Seite 20