Publicidad
Idiomas disponibles
Idiomas disponibles
32 Screw cylinder (36) with thread sealant
into pump tube
33 Do not tighten at this time
34 Install o-ring (38) onto lower valve
seat (39)
35 Install ball (37) and pin (40) into lower
valve seat
36 Screw lower valve seat into cylinder
37 Do not tighten at this time
38 Remove from vise
39 Install rod and coupling into pump tube
40 Use care not to damage seal
41 Screw jam nut (22) onto pump tube
Attach pump tube to
air motor
NOTE
Support pump tube during installation
Damage to components can occur
42 Screw coupling onto air motor piston rod
until spring clip holes align
43 Rotate entire pump tube assembly
44 Install spring clip
45 Screw pump tube into body (7)
46 Place a large wrench or other suitable
tool into slot of lower valve seat (39)
47 Tighten all components securely
48 Crush all gaskets
49 Tighten jam nut (22)
12
Publicidad
