Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustments (Continued)
Adjustments menu
m
=
©)
rm
wm
I
Convergence
: Convergence is affected by geomagnetism. Use this function when
convergence error occurs after moving the monitor or changing the screen
angle.
These convergence adjustments should be made after monitor operation has
stabilized.
o
[pitts] H.Convergence
: Horizontal convergence of the image (color fringing) can be adjusted.
Press [2] key to toggle between H.Convergence and V.Convergence.
Note: If the [4 and B keys are pressed at the same time on the
H.Convergence adjustment screen, the standard level (50) will
be set.
Press the B key to move red to the right and blue to the left.
Press the [4 key to move red to the left and blue to the right.
[=$] V.Convergence
: Vertical convergence of the image (color fringing) can be adjusted.
Press [2] key to toggle between V.Convergence and H.Convergence.
Note: If the (4 and PJ keys are pressed at the same time on the
V.Convergence adjustment screen, the standard level (50) will
be set.
Press the b] key to move red downwards and blue upwards.
Press the [4 key to move red upwards and blue downwards.
[=|
Linearity-C
. The image can be adjusted for vertical linearity in the center.
-
Press [2] key to toggle between Linearity-C and Linearity-E.
Note: If the Ed and >] keys are pressed at the same time on the Linearity-C
adjustment screen, the standard level will be set.
Press the B®) key to make the center linearity narrower.
Press the [d key to make the center linearity wider.
E
Linearity-E : The image can be adjusted for vertical linearity in the edge.
Press [2] key to toggle between Linearity-E and Linearity-C.
Note: If the Mi and P] keys are pressed at the same time on the Linearity-E
adjustment screen, the standard level will be set.
Press the $) key to make the bottom linearity wider.
Press the Hi key to make the top linearity wider.
? T
Language
: The language of the On-Screen Display can be selected from among
German, French, English, Italian and Spanish.
Select with the [4 or BP] key.
OSD
Position : itis possible to adjust the position and color that the on-screen panel
is to be displayed. The panel will rotate in a counter-clockwise direction
every time the [2] key is pressed.
The screen color layout can be changed by holding down the [2] key
and pressing the Æ key.
Six different color layouts are available.
Fi Degauss . Use this function to reduce the irregular colors in the image. The degaussing
operates for approximately five seconds after selection.
Use this function when irregular colors occur in the image after moving the
monitor or the changing the screen angle.
Note: Be informed that a continued use of this function cannot result in a
satistactory effect. (Try to keep an interval of about 30 minutes or so
between operations.)
12
Publicidad
