Publicidad
Idiomas disponibles
Idiomas disponibles
Button functions
The display (6) shows the time in minutes and the temperature in °C.
On / Off
Start/Stop
Preset
programs
Temperature
Timer
Plus
Minus
As soon as you insert the plug, the device will beep and the button will flash,
signalling that the device is on. The device switches to standby mode.
After selecting the function you want, press this button to start. While the
device is working, press this button to stop the device. After you have selected
a program, you cannot switch directly to another program. You must long press
the power button to switch the device to standby mode and then press the
power button again to select the other program.
Press this button to cycle through the cooking modes of the different programs.
All programs have a preset time and temperature, but you can adjust the time
and temperature depending on the amount and size of the food.
Before you start the fryer, press the temperature button to set the working
temperature. Then press
between 60-200 °C. Press the button while the device is in operation to
subsequently adjust the temperature. Then press
decrease the temperature in steps of 5 °C.
Before you start the fryer, press the timer button to set the working time. Then
press
or
to set the time between 1-90 minutes. Press the button while
the device is in operation to subsequently adjust the time. Then press
to increase or decrease the time.
•
From 1-30 minutes, the time will increase/decrease in 1-minute increments.
•
From 30-60 minutes, the time will increase/decrease in 5-minute increments.
•
From 60-90 minutes, the time will increase/decrease in 10-minute increments.
Press this button to increase the time and temperature. Press and hold the
button to quickly increase the time/temperature.
Press this button to decrease the time and temperature. Press and hold the
button to quickly decrease the time/temperature.
or
to increase or decrease the temperature
or
to increase or
or
EN
19
Publicidad
