Descargar Imprimir esta página

Alpine 3681 Manual De Instalación Y Operación página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
3. Adjusting the Time Correction by using the AD-
JUSTMENT buttons @ and @. The TIME CORR.
will appear in the Digital Display @.
LOW, MID or HIGH Independent Adjustment Mode
(LOW, MID or HIGH illuminate for each band):
To
make
independent
time
adjustments
of .the
age MID and HIGH bands.
Press the MODE button @ to activate the LOW/
MID/HIGH switching mode.
2. Press the BAND button @ or @ to select a de-
sired range (LOW/MID/HIGH).
3. Make the time corrections with the ADJUST-
MENT buttons @ and 4). The time value will be
indicated in the Digital Display @.
4. When
the desired
value
is obtained,
repeat
steps 2-3 for next adjustment.
NOTE:
If different time settings have been made in the In-
'dependent
mode, the simultaneous
adjustment
mode will not be available.
In this case, resetting
the times in each range to the same values, will al-
low the Simultaneous mode to be available again.
Saving Current Set-up
Using the SAVE button @, it is possible to remem-
ber all of your current adjustments for later recall.
This allows some experimentation with other set-
tings without fear of losing the current control posi-
tion.
1. Press and hold the SAVE button @ until the dis-
play flashes. The display will flash for 5 seconds.
2. Press the SAVE button @ again during flashing.
' 3. The Set-up just saved can be recalled at any time
by pressing and releasing the SAVE button @.
How to using the SET-UP Button @
This button is used to disable the adjustment but-
tons. This prevents them from being misadjusted
accidentally.
1. Press the SET-UP button @ for more than 2 sec-
onds.
2. The illumination color of the SET-UP button ©
will change from amber to green, showing the
controls are locked.
3. To release the locked condition, press the SET-
UP button @ again.
NOTE:
This unit has been developed with the latest digital
technology. To obtain 100% performance of the
functions, the unit has we recommend you to setup
'the system by consulting with the dealer you pur-
chased the unit.

Publicidad

loading