Publicidad
Idiomas disponibles
Idiomas disponibles
This unit can be placed inside the trunk, under the
seat or underdash. However, to avoid unnecessary
signal wiring, it is better to mount the 3681 as close
as possible to the amplifiers.
If the permanent mounting location will not allow
changes in the adjustment of the controls, the rest
of the sound system must be completely installed,
and ail the adjustments to the 3681 should be made
before it is permanently mounted in its location. In-
put and output wires may be temporarily extended
in order to have the unit in a more accessible posi-
tion for adjustment.
Choosing a readily accessible
location will save having to remove the unit in order
to revise any of its adjustments.
DO NOT MOUNT THE UNIT IN LOCATIONS THAT
WILL BE IN THE VICINITY OF MOISTURE OR EXx-
TREME
HEAT (such as the engine compartment).
The 3681
can be mounted
by using self-tapping
screws or Veicro™ tape. Make sure you have all the
necessary parts and tools, then begin mounting ac-
cording to one of the following procedures:
Screw-down Mounting:
1. Hold the 3681 at its mounting location and mark
screw holes.
Make sure that there are no objects
behind the surface where drilling is to be made that
may become damaged.
2. Drill holes and secure the unit with self-tapping
screws (M4 X 14) supplied.
Self-Tapping Screws
(M4 x 14)
Dashboard
Floor/Trunk j
A
|
rp
Self-Tapping Screws
(M4 x 14)
Velcro™ Tape Mounting:
This installation method
is suggested when the
mounting location does not permit drilling.
USE THIS METHOD
ONLY WHEN THE UNIT IS
MOUNTED
ON
A
HORIZONTAL
SURFACE.
NEVER MOUNT A UNIT UPSIDE-DOWN USING
THE VELCRO™ TAPE.
1. Remove the adhesive protective paper from one
side of the Velcro™ tape.
2. Attach the exposed adhesive side to the under-
side of the 3681, in a central location. Do not cover
the serial number.
3. Make sure the mounting location is clean, dry
and free from contaminants.
4. Remove the protective strip from the other side
of the Velcro™ pad.
5. Press the unit onto its mounting location.
Velcro™ Tape
Velcro™ Tape
Fig. 1
Fig. 2
Press onto the carpet.
Publicidad
