Eaton TRIPP LITE Serie Manual Del Propietário página 17

Installation
Non-Video Port Installation
Note: Be sure the power adapter is properly connected and the
power button of the unit is turned on. This should occur once all your
devices are properly plugged in.
• Connect up to 3 USB-A peripherals including speeds up to
10 Gbps. The USB-A dedicated charging port supports up to 5V
1.5A (7.5W) of charging power.
• Connect an Ethernet network through the RJ45 port to achieve
speeds up to 10/100/1000 Mbps (1 Gbps).
• Connect the 3.5 mm Mini Stereo port to a headset, microphone
or speaker. If the audio is not automatically changed to USB
Audio Device, open the control panel and select the hardware
and sound icon. Then click Sound > Manage Audio Devices
and select USB Audio Device.
• Transfer data up to 10 Gbps using the USB-C data port.
• (Optional) If you have a security-cable chain lock, connect it to
the anti-theft lock port.
17