Metabo W 21-230 Instrucciones De Manejo página 5

02 ENG_9790_0205
Instruction for use
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new Metabo power tool.
Every Metabo power tool is carefully tested and is subjected to the strict quality controls of the Metabo
Quality Assurance section. However, the service life of any power tool is to a great degree dependent on
yourself as the user. Please read and understand the information contained in these Operating
Instructions and the accompanying documents. The more care you exercise in handling your Metabo
power tool, the longer will be the reliable service it provides for you.
Contents
1 Declaration of Compliance
2 Proper Use
3 General Safety Rules
4 Specific Safety Rules
5 Functional Description
6 Special Product Features
7 Assembly, Initial Use
8 Operation, Switching On/Off
9 Operation, Fitting Tools
9.1 Fitting cutting and grinding discs
9.2 Securing/releasing the Quick
clamping nut (depending on
equipment)
9.3 Securing/releasing the clamping nut
(depending on equipment)
10 Maintenance
11 Troubleshooting
12 Accessories
12.1 Fitting the hand guard
12.2 Fitting the backing pad and sanding
discs
12.3 Fitting the cup-grinding wheel with
wheel guard
12.4 Wheel guard with cutting and
chasing guide for processing stone
13 Repairs
14 Environmental Protection
15 Technical Specifications
1 Declaration of Compliance
On our own responsibility, we hereby declare that
this product complies with the standards or
standard-setting documents listed on page 2.
2 Proper Use
Equipped with the appropriate accessories,
Metabo angle grinders are suitable for cutting,
grinding, sanding with a backing pad and brushing
18.12.2007 13:31 Uhr Seite 5
metal, concrete, stone and similar materials in dry
operating conditions.
Saw discs, saw chains or similar parts must not be
used under any circumstances.
The operator bears sole responsibility for any
damage caused by inappropriate use.
The generally recognised accident prevention
regulations and the accompanying Safety
Instructions must be observed.
3 General Safety Rules
1 WARNING! Read and understand all
instructions.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious
personal injury.
SAVE THESE INSTRUCTIONS.
2 Work Area
2.1 Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
2.2 Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
2.3 Keep bystanders, children, and visitors
away while operating a power tool. Distractions
can cause you to lose control.
3 Electrical Safety
3.1 Grounded tools must be plugged into an
outlet properly installed and grounded in
accordance with all codes and ordinances.
Never remove the grounding prong or modify
the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you
are in doubt as to whether the outlet is
properly grounded. If the tools should electrically
malfunction or break down, grounding provides a
low-resistance path to carry electricity away from
the user.
Applicable only to Class I (grounded) tools.
ENGLISH
5