Eaton TRIPP LITE Serie Manual Del Propietário página 5

Product Overview
Front View
HDBaseT long
1
reach mode switch
(reserved)
2 HDMI audio switch
3 RS-232 port
4
HDBaseT port
5 Cable lock screw
6
Audio-in
7 USB-B port
Firmware upgrade
8
switch (reserved)
9 Tx / Rx switch
J HDMI-in
1 1
8 8 9 9
Sets to enable the long reach mode. This switch is currently
reserved for future expansion.
Sets to enable the embed and de-embed functions. See Tx and
Rx Switch.
Connects to an RS-232 serial controller, such as a PC or a
control system.
Connects to an HDBaseT3-certified Cat6a cable with zero
latency to transmit HDMI and control signals to the connected
receiver if the unit is set to a transmitter.
Universal HDMI cable lock that provides the easiest way to
secure an HDMI cable to most HDMI devices.
Connects to an audio source device, such as a PC.
Connects to source device, such as a PC.
This switch is reserved for Technical Support. To perform a
firmware upgrade, first contact your dealer.
Sets to define the unit as a transmitter or a receiver.
Connects to an HDMI video source device using an HDMI cable.
2 2 3 3 4 4 5 5 6 6 7 7
J J
5