Publicidad
Idiomas disponibles
Idiomas disponibles
1.A drain outlet is designed at the bottom of the freezer liner, and when defrosting,
remove its rubber cover , then the defrosting water flows out and is discharged from
the drain pipe.
2.Extract the water conduit by 20-25mm until the water hole can be seen.
3.Twist the water conduit until the arrow points downward.
4.After defrosting is done, make sure there is no more water coming out before out
the water conduit in place and make the arrow point upward.
Important Notes:
• Do not use pointed or sharp-edged objects such as knives or forks to remove the
frost.
• Never use hairdryers, electrical heaters or other such electrical appliances for
defrosting.
•It is normal that water beads or frosts appear on the freezer collar and door gaskets
in the wet weather, which will not affect the normal use. In such case, please clean it
with a dry cloth in time!
English-11
Publicidad
