Ego Power+ HT2400 Manual De Funcionamiento página 18

TO START THE HEDGE TRIMMER
Your hedge trimmer is equipped with two switch levers . Both switch levers need to be
pressed for the hedge trimmer to start . Depress and hold the switch lever in the front
handle and press the switch lever in the rear handle to start the hedge trimmer .
TO STOP THE HEDGE TRIMMER
Move hedge trimmer away from cutting area, release one of the switch levers to stop
the hedge trimmer .
WARNING:
work breaks and after finishing work .
USING THE HEDGE TRIMMER
WARNING:
BLADE! IT CAN BECOME ELECTRICALLY LIVE AND VERY DANGEROUS . Continue to hold
the hedge trimmer by the insulated rear handle or lay it down and away from you in
a safe manner . Disconnect the electrical service to the damaged line or cord before
attempting to free the blade from the line or cord . Failure to heed this warning will
result in serious personal injury or possible death .
WARNING:
trimmer until they have been replaced . Failure to do so could result in possibly serious
personal injury .
WARNING:
and the rear handle to hold the hedge trimmer during operation .
WARNING:
Do not attempt to remove cut material or hold material to be cut when the blades
are moving . Make sure that the blades have totally stopped and the battery pack is
removed before clearing jammed material from blades . Do not grasp the exposed
cutting blades or cutting edges when picking up or holding the unit .
WARNING:
as cords, lights, wire, or string which can become entangled in the cutting blade and
create a risk of serious personal injury .
18
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400/HT2400-FC
Always remove the battery pack from the hedge trimmer during
If the blade jams on any electrical cord or line, DO NOT TOUCH THE
If any parts are missing, damaged or broken, do not operate your
To prevent serious personal injury, always use both the front handle
To prevent serious personal injury, keep hands away from blades .
Clear the area to be cut before each use . Remove all objects, such