Ego Power+ HT2400 Manual De Funcionamiento página 9

 Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users .
 Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools .
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control;
 Use the power tool, accessories, tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation .
 Do not incinerate the appliance even if it is severely damaged. The batteries can
explode in a fire .
BATTERY TOOL USE AND CARE
 Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack .
 Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire .
 When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire .
 Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contact eyes,
additionally seek medical help . Liquid ejected from the battery may cause irritation
or burns .
SERVICE
 Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained .
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400/HT2400-FC
9