Kohler Choreograph K-96127-0 Guía De Instalación Y Cuidado página 6

Corner Square
4. Install the Window Trim
CAUTION: Risk of product damage. Take care to avoid bending
the corner squares.
Apply a bead of silicone adhesive to the back of the trim pieces
where they contact the window area
Apply a bead of silicone adhesive diagonally across the back of
the corner squares.
Apply spots of silicone adhesive to the back of the trim pieces
where they contact the walls. Place a 2" (51 mm) spot of adhesive
every 8" (203 mm). Apply sufficient adhesive so that the adhesive
will contact the wall when installed.
Install the trim to the window, positioning the corner squares
over the tabs.
Wipe away any excess adhesive.
Tape the trim in place as shown until the adhesive cures.
1357598-2-B 6 Kohler Co.