Pur Line RAFY 82 Manual De Instrucciones página 12

"MODE" button - Only valid under FAN function
Press the MODE button, the NATURE indicator will turn on.
Press MODE button 2 times to turn to the SLEEP mode.
Press MODE button 3 times to turn to the NORMAL mode again.
HIGH speed + SLEEP mode: in HIGH speed mode, select SLEEP mode.
Press the MODE button two times when SPEED mode is HIGH to set SLEEP mode with HIGH wind speed. Both HIGH
and SLEEP indicators will be on. The wind speed will automatically change with time as follows:
- First 0.5 hr: HIGH and MED wind come out alternately every 10 seconds.
- Second 0.5 hr: MED speed + SLEEP mode.
- After 1hr till power off: LOW speed + SLEEP mode
MED speed + SLEEP mode: in MED speed mode, select SLEEP mode.
Press the MODE button two times when SPEED mode is MED to set SLEEP mode with MED wind speed. Both MED and
SLEEP indicators will be on. The wind speed will automatically change with time as follows:
- First 0.5 hr: MED and LOW wind come out alternately every 10 seconds.
- After 0.5 hr till power off: LOW speed + SLEEP mode.
LOW speed + SLEEP mode: in LOW speed mode, select SLEEP mode.
Press the MODE button two times when SPEED mode is LOW to set SLEEP mode with LOW speed. Both LOW and
SLEEP indicators will be on. LOW wind comes out 10 seconds and stops 5 seconds alternately every 15 seconds until
power off.
Note: To avoid overcooling, do not adjust the direction the wind to the human body.
HIGH speed+ NATURE mode: in HIGH speed mode, select NATURE mode.
Press the MODE button once when SPEED mode is HIGH to set NATURE mode with HIGH speed. Both HIGH and
NATURE indicators will be on. The wind speed will automatically change with time as follows:
»
-HIGH speed 5 secs. LOW speed 5 secs.
» »
MED speed 5 secs. LOW speed 5 secs.
»
stop 5 secs. The unit will work circularly in the mode until power off.
MED speed + NATURE mode: in MED speed mode, select NATURE mode.
Press the MODE button once when SPEED mode is MED to set NATURE mode with MED speed. Both MED and NATURE
indicators will be on. The wind speed will automatically change with time as follows:
»
-MED speed 5 secs. LOW speed 5 secs.
»
speed 10 secs. MED speed 5 secs.
The unit will work circularly in the mode until power off.
LOW speed + NATURE mode: in LOW speed mode, select NATURE mode.
Press the MODE button once when SPEED mode is LOW to set NATURE mode with LOW speed. Both LOW and NATURE
indicators will be on. The wind speed will automatically change with time as follows:
»
-MED speed 5 secs. LOW speed 15 secs.
»
speed 10 secs. MED speed 5 secs.
secs. The unit will work circularly in the mode until power off.
"SWINg" button
Press the SWING button, the indicators will be on and the swinging wind comes out. It can cover 60 degrees
horizontally. Press it again to stop at desired position and the indicator turns off.
"TIMER" button
Press the "TIMER" button to adjust timer setting. Every press adds 30 minutes up to 7.5 hours. The set period is
indicated on the control panel, if 7,5 h is selected all LED indicators are on.
To clear timer mode, press "TIMER" button 16 times (one more press after reaching 7.5 hours); the TIMER indicators
will be off.
EN
»
MED speed 5 secs.
» »
stop 5 secs. MED speed 5 secs.
»
MED speed 5 secs.
» »
LOW 5 secs. stop 5 secs.
»
MED speed 5 secs.
» »
LOW 10 secs. stop 5 secs.
10
» »
stop 5 secs. MED speed 10 secs.
»
HIGH speed 5 secs.
» »
LOW 5 secs. stop 5 secs.
» »
MED speed 5 secs. LOW speed 5 secs.
» »
LOW 15 secs. stop 5 secs.
»
MED speed 5 secs.
»
HIGH speed 10 secs.
»
LOW speed 5 secs.
» »
MED speed 10 secs.
»
stop 5 secs.
» »
MED speed 5 secs.
» »
LOW speed 20 secs. stop 5
LOW
LOW