Publicidad
Idiomas disponibles
Idiomas disponibles
4.
5=
6.
(OPTIONAL STEP) Add liquid fabric softener.
NOTE: Do not spill or drip any fabric softener onto the
clothes. Undiluted fabric softener can stain fabrics. Always
dilute fabric softener with warm water. Too much fabric
softener can make some items (diapers and towels)
nonabsorbent.
If this happens, do not use it every load, or
use less of it in each load.
Style 1: With liquid fabric softener (on some models)
•
Use only liquid fabric softener in this dispenser. Pour
measured liquid fabric softener into the dispenser.
Softener is added automatically
during the rinse portion
of the cycle. Dilute liquid fabric softener by filling the
dispenser with warm water until liquid reaches the lowest
edge in the dispenser opening.
Style 2: Without liquid fabric softener dispenser (on some
models)
•
In the final rinse ONLY, add fabric softener that has been
diluted with 1/2to 1 cup (125 to 250 mL) warm water.
Close the washer lid.
Turn the WATER LEVEL selector to the correct setting for your
wash load size and the type of fabric being washed. You may
change the water level selection after the washer has started
filling by turning the selector to a different setting. On models
with Variable Water Level control, you should turn the knob to
RESET, then to the desired setting.
Medium
Load
7. Set the TEMPERATURE selector to the correct setting for the
type of fabric and soils being washed. Use the warmest wash
water safe for fabric. Follow garment label instructions.
Water Temp
Use for
Hot
Whites and pastels
Heavy soils
Warm
Bright colors
Moderate to light soils
Cold
Colors that bleed or fade
Light soils
NOTE: In wash water temperatures
colder than 60°F (15.5°C),
detergents do not dissolve well. Soils can be difficult to
remove. Some fabrics can retain wear wrinkles and have
increased pilling (the formation
of small lint-like balls on the
surface of garments).
8. (OPTIONAL STEP) OPTIONS selector (on some models). For
an additional rinse and spin at the end of a wash cycle, set
the Options selector to 2nd Rinse. On some models, the 2nd
Rinse feature is part of the cycle.
g. (OPTIONAL STEP) SPEEDS selector (on some models). Each
speed setting is designed for different types of fabric and soil
levels.
10. Push in the Cycle Control knob and turn it clockwise to the
wash cycle you want. Reduce the wash time when using a
small water level setting. Pull out the Cycle Control knob to
start the washer.
To stop or restart your washer:
•
To stop the washer at any time, push in the Cycle
Control knob.
•
To restart the washer, close the lid (if open) and pull out
the Cycle Control knob.
WASHER CARE
Use a soft, damp cloth or sponge to wipe up any spills such as
detergent or bleach from the outside of your washer.
Clean your washer interior by mixing 1 cup (250 mL) of chlorine
bleach and 2 cups (500 mL) of detergent. Pour this mixture into
your washer and run it through a complete cycle using hot water.
Repeat this process if necessary.
Remove any hard water deposits using only cleaners labeled as
washer safe.
Cleaning
the liquid fabric softener
dispenser (on some
models):
Style 1: To remove dispenser, grasp the top of the dispenser with
both hands. Squeeze and push upward with both thumbs to
remove. Flush the dispenser with warm water.
Publicidad
