Hilti DAG 230-D Manual De Instrucciones página 24

Do not use extension cords with 1.25 mm² conductor cross section.
2.9 Using extension cords outdoors
When working outdoors, use only extension cords that are approved and correspondingly marked for this application.
2.10 Using a generator or transformer
This power tool may be powered by a generator or transformer when the following conditions are fulfilled: The unit
must provide a power output in watts of at least twice the value printed on the type identification plate on the power
tool. The operating voltage must remain within +5% and -15% of the rated voltage at all times, frequency must be in
the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and
starting boost.
Never operate other power tools or appliances from the generator or transformer at the same time. Switching other
power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the
power tool.
2.11 DC‑EX 230/9" disc guard with guide carriage for cutting 2
The power tool may be used for cutting work on mineral materials only when fitted with a disc guard (dust removal
hood) and guide carriage.
CAUTION
Use of this guard for working on metal is not permissible.
NOTE
It is recommended that a dust removal system consisting of matched components, i.e. dust removal hood and a
suitable Hilti vacuum cleaner, are used for cutting, grinding and slitting work on mineral materials such as concrete or
stone. This system serves to protect the operator and increase the life of the power tool and disc used.
2.12 Guard with cover plate
CAUTION
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications, use
only the guard with cover plate. This is available as an optional accessory.
3 Insert tools, accessories
Discs of max. 230 mm diameter designed for 6500 /min and a peripheral speed of 80 m/sec
Designation
Abrasive cutting disc
Abrasive cutting disc
Abrasive cutting disc
Abrasive grinding disc
Abrasive grinding disc
Diamond cutting disc
Accessories for the DCG 230‑D and DAG 230‑D
Designation
"Kwik-Lock" clamping nut (optional)
Disc guard with carriage for cutting
Guard with cover plate
Toolbox
Vacuum cleaner recommended by Hilti
Hoop handle
Item number, description
AC-D Universal Premium
AC-D Universal Super Premium
AC-D INOX
AG-D Universal Premium
AG-D Universal Super Premium
DC-D 230
Description
DC‑EX 230/9"
en
19