ADE WS 1710 Instrucciones De Operación página 48

Alarm
5. Set the desired alarm minute with the multi-function knob.
6. Push the multi-function knob to confirm the setting.
"L20" or the value of the last set volume level flashes in the display.
7. Set the desired alarm volume with the multi-function knob.
8. Push the multi-function knob to confirm the setting.
The setting operation is completed.
When setting an alarm time, the alarm function is activated automatically. It
indicated by the symbols
Being awakened
At the set time, you will be awakened by the selected alarm source (buzzer or radio),
where the alarm volume becomes more intense as the alarm duration increases.
Switching off the alarm for 24 hours
− Press any button (except the multi-function knob) to stop the alarm. After
24 hours, the alarm will be triggered again.
Auto-stop function
If you do not press a button, the alarm switches off automatically after 30 minutes.
After 24 hours, the alarm will be triggered again.
Snooze function
− Press the multi-function knob 1x when the alarm sounds.
The alarm signal stops and the alarm symbol
After 8 minutes, the device switches on again and wakes you up again.
This procedure can be repeated multiple times.
Turning the alarm off completely
Deactivate and activate the respective alarm function by repeatedly pressing the SET
button.
Press SET 1x: is displayed: Alarm 1 is active, Alarm 2 is deactivated
Press SET 2x: is displayed: Alarm 1 is deactivated, Alarm 2 is active
Press SET 3x: and
Press SET 4x: Alarm symbols are no longer displayed: Alarm 1 and 2 are deactivated
48
or
are displayed: Alarm 1 and 2 are active
.
or and Z flashes in the display.
Z
Weather station with radio alarm clock WS 1710