Urmet 9854/58 Manual De Usuario Y Instalacion página 14

5. Connect the device to the system and to the
power supply provided.
The end of a stranded conductor must
not be consolidated with mild soldering
in the points in which the conductor is
subject to contact pressure.
6. Carry out the device configuration by means of
jumpers and/or dip-switches.
7. Replace the terminal strip cover.
8. Power on the device.
9. Complete your parameter configuration by
using the Urmet CallMe App.
2.2. WALL MOUNTING WITH
THE KIT REF. 1083/88
1. Fix the base of the container (supplied in the
kit) to the flush-mounting box mod. 503 or
Ø 60mm as shown in the following figures:
n. 2 M3.5 x 19 mm
14
Box Mod.503 -
horizontal
supplied
Box Mod.503 -
vertical
n. 2 M3.5 x 19 mm
supplied
Box Ø 60 mm
n. 2 2.9 x 13 mm with
countersunk head
or, alternatively, with screws and anchors supplied
in the kit.
Ensure cables are led through the left
side.
2. Remove the 2 covers from the device.
2
1
3
DS9854-005D