Lincoln Electric LMA 75 1.0 m Manual De Instalación Y De Uso página 8

A
A B
LMA 75 hanging
B
B
A
A
LMA 75 standing
Fig. 6.1 Adjustment points
7 TROUBLESHOOTING
If the product does not function (correctly), consult
the checklist below to see if you can remedy the
error yourself. Should this not be possible, contact
your supplier.
WARNING!
Obey the safety regulations that are written in
chapter 3 when you carry out the activities below.
Symptom Problem
The extraction Escape of
arm does not stay fume or
in the desired dust; no
position proper
extraction
You cannot get
the arm in the
desired position
Escape of fume or No proper
dust; insufficient extraction
extraction
8 SPARE PARTS
The following spare parts are available for the
product;
- refer to exploded view Fig. V on page 34
0000117805/01MAY2023/0 LMA 75 1.0 m | LMA 75 1.5 m
B
Possible Solution
cause
Friction Adjust the friction;
setting is not refer to § 6.2
correct
Loose hose(s) Fasten the hose(s)
properly
Hose damage Replace the hose(s)
9 DISPOSAL
After life of the product, dispose of it in accordance
with federal, state or local regulations.
EN | 6