Uline H-3704 Manual Del Usuario página 6

PARAMETER SETTINGS
PAGE GROUPS
Parameters are grouped in a page arrangement. Each
page will contain a list of the parameters associate with
that group. Move into the page groups from the display
menu by using the right arrow key.
PARAMETER GROUPS
Select the desired parameter group by using the up
and down keys. Once the parameter group is located,
use the right arrow key to enter the group. Use the up
and down keys to scroll the parameters on that page.
PARAMETERS
Once the parameter has been located, use the right
arrow key to view the parameter setting.
PROGRAMMING MODE
Use the ENTER key to enter the programming mode. The
displayed parameter will flash, indicating the parameter
can be changed.
PARAMETER CHANGES
Use the up and down keys to change the parameter
setting. Press ENTER to enter the parameter setting.
If the parameter change is successful, the keypad
will display the end (End) message and return to he
parameter number display. If the parameter change
Successful Unsuccessful
Parameter Change Parameter Change
is unsuccessful the keypad will display an error (Err)
message, the parameter will not be hanged, and the
parameter number will again be displayed.
Parameter Parameter Parameter Groups Display
TO EXIT PROGRAMMING MODE
Number
40
30
Pressing left arrow backs out of Parameter Mode and
20
returns you to Display Mode.
PAGE 6 OF 24 0721 IH-3704