Publicidad
Idiomas disponibles
Idiomas disponibles
To select this mode from the remote control:
•
Press the button
until the symbol
remote control screen.
•
Select the desired temperature between 13°C and 27°C
(55°F– 81°F) by pressing on the
and
•
Select the fan speed by pressing the button
Four speeds are available:
•
High speed / Medium speed / Low speed
•
"Auto" speed: the unit will automatically adapt the fan speed according to the selected temperature
for the best energy savings.
COMMENTS:
•
In HEATING mode, the dehumidification function is also on.
•
In HEATING mode, the drain hose must be attached in the same way as in DEHUMIDIFYING mode
to allow moisture to be drained to the outside.
•
When the unit is in a very cold room, it will automatically activate the defrost function:
- The unit then interrupts normal fan operation (in Cooling, Heating and Fan mode).
- The symbol
appears on the screen.
- When defrosting of the unit is activated, it is necessary to wait a few minutes before the unit
resumes normal operation.
•
In heating mode, after the unit is switched off, the shutters do not close immediately, there is a
cooling period.
•
If the unit starts in cooling mode (if that was the last function before the unit was turned off), and you
switch to heating mode, it takes some time for the changeover to take place, this waiting period is
part of normal use.
FAN MODE
When using this mode, the drain hose does not need to be attached
To select this mode from the control panel:
•
Press the button
until the indicator light
•
Select the fan speed by pressing the button
To select this mode from the remote control:
•
Press the button
until the symbol
control screen.
•
Select the fan speed by pressing the button
Three speeds are available:
High speed / Medium speed / Low speed
32
is displayed on the
buttons.
.
on the control panel comes on.
.
is displayed on the
.
DEHUMIDIFIER MODE
Ideal for reducing the humidity in a room (in spring and autumn, in damp rooms, during rainy periods,
etc.).
In Dehumidifier mode, the drain hose must be installed to allow the moisture to drain to the outside. In
Dehumidifier mode, the speed cannot be selected and the appliance adapts the speed automatically.
To select this mode from the control panel:
•
Press the button
until the indicator light
To select this mode from the remote control:
•
Press the button
until the symbol
is displayed on the control screen.
SMART MODE
With this mode, the unit automatically chooses to operate in either Cooling, Fan or Heating mode.
To select this mode from the control panel:
•
Press the button
until screen displays the following sequence:
•
Select the fan speed by pressing the button
To select this mode from the remote control:
•
Press the button
until the symbol
is displayed on the control
screen.
•
Select the fan speed by pressing the button
Four speeds are available:
•
High speed / Medium speed / Low speed /
•
Auto speed:
- The unit switches to Heating mode when the room temperature is below 20°C (68°F)
- The unit switches to Air Conditioning mode when the room temperature is above 23°C (73°F)
- The unit switches to Fan mode when the room temperature is between 20°C (68°F) and 23°C
(73°F).
comes on and the symbol
appears on the screen.
.
.
33
Publicidad
