Publicidad
Idiomas disponibles
Idiomas disponibles
Be ding
Evenly load the laundry in the washing machine and then tightly close the door
of the unit.
Note:
1.When first using the washing machine, let it run unloaded for one
program to prevent the laundry from being stained by oil or dirty water
from the washing machine.
2.Do not overload the washing machine.
P_t detergent
in the
dispenser
There are three partitions in the detergent.
Partition 1: It is used for the prewash function.
Partition 2: Put the detergent in this partition no matter whether the prewash
function is selected or not.
Partition 3:
Caution: 1.
2.
3.
Put the softening agent in this partition if the laundry has gone
through the softening process.
Do not add liquid detergent into partition land 2.
For prewashing program, detergent should be added to both
partition 1 and 2; for other programs, do not add detergent to
partition 1.
Do not overuse softening agent as this may damage arfifical fabrics.
W_s_ing
p_eg_m
setting
Set the washing program correctly in accordance with the laundry load. First
connect the mains and select the power on/off button. The machine will work on
the default standard program. Select the program selection button for the
required washing program.
The above operation should be under the condition of no power down. The
machine will continue its previous program since the machine has the memory
function after the power down. The memory function can be canceled by turning
off the power and restart it.
16
Publicidad
