30" DUAL FUEL SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
(Models with an Electric Oven and a Gas Cooktop)
NOTES:
© Do not pinch the power supply cord between the range and the wall.
@ Do not seal the range to the side cabinets.
© 24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet when
the bottom of wood or metal cabinet is protected by not less than 1/4" (0.64 cm) flame
retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm)
Stainless steel, 0.024" (0.6 mm) aluminum, or 0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance when the cabinet is unprotected.
© For cutouts below 22 7/8"(58.1 cm), appliance will slightly show out of the cabinet.
& Allow at least 19 4%" (48.9 cm) clearance for door depth when it is open.
22 7/8" (58.1 cm) min.
23 1/4" (59.05 cm) max.
i
(see Note 4) —>
2174"
4
i¢—
1 1/8"
(2.86 cm)
=
rot
:
<
=
= =>
CABINET
Ref.
Side Panel
ASHEIGHT
B.
Cc. COOK-
D. DEPTH TO
E. CUTOUT WIDTH
F.. CUTOUT-DEPTH
G. HEIGHT OF
WIDTH|
TOP-WIDTH-|
FRONT-OF RANGE | (countertop and cabinet)
COUNTERTOP
35 5/8" (90.5 cm)
30"
31 A"
28 5/16"
30+ 1/16"
2134" (55.2 cm) min. | 36 5/8" (93 cm) Max.
36 5/8" (93 cm) | (76.2 cm)
(80 cm)
(71.9 cm)
(76.2+ 0.15 cm)
22'/s" (56.2 cm) max. | 35 5/8" (90.5 cm) Min.
24" (61 cm) min.
with backquard